Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Blower Motor: Service and Repair
CAUTION:
-
All SRS wiring harnesses are covered with yellow outer insulation.
-
Before disconnecting any part of the SRS wire harness, install the short connectors.
-
Replace the entire affected SRS harness assembly if it has an open circuit or damage wiring.
BLOWER UNIT REPLACEMENT
1. Remove the glove box lower panel and disconnect the connector from it.
2. Disconnect the glove box light connector and glove box mounting bolts, then remove the glove box.
