Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Cabin Temperature Sensor / Switch: Testing and Inspection
NOTE: It is not necessary to remove the sensor from the climate control unit to test it.
Compare the resistance reading between the No. 1 and No. 2 terminals of the in-car temperature sensor with specifications shown in the graph: It should
be within specifications.
Resistance at 68°F (20°C): approx. 2 K Ohm.
NOTE: Dip the sensor in ice water and measure the resistance. Then pour hot water on the sensor and check for change in resistance.
CAUTION: The sensor uses a thermistor which can be damaged if high current is applied to it during testing. Therefore, use a circuit tester that
puts out a measuring current of 1 mA or less. (At the 20 K Ohm range)
