Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Compressor Clutch: Testing and Inspection
Component Test - Automatic Climate Control
1. Check pulley bearing play and drag by rotating the pulley by hand. Replace the clutch set with a new one if it is noisy or has excessive play/drag.
2. Measure the clearance between the pulley and pressure plate all the way around. If the clearance is not within specified limits, the pressure plate
must be rencoved and shims added or removed as required.
CLEARANCE: 0.5 ± 0.15 mm (0.02 ± .006 in)
NOTE: The shims are available in three sizes: 0.1 mm, 0.3 mm and 0.5 mm of thickness.