Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
NOTE:
-
Be careful not to damage the pulley and compressor during removal/installation.
-
Once the snap ring B is removed, replace it with a new one.
4. Remove snap ring A and field coil.
NOTE:
-
Be careful not to damage the field coil and compressor during removal/installation.
-
Once the snap ring A is removed, replace it with a new one.
5. Install parts in the reverse order of removal, and:
-
Install the field coil with the wire side facing down.
-
Clean the pulley and compressor sliding surfaces with non-petroleum solvent.
-
Check the pulley bearings for excessive play.
-
Make sure the snap rings are in the groove properly.
-
Apply locking agent to the threads on the center bolt.
-
Make sure that the pulley turns smoothly, after it's reassembled.