Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
3. Position the crankshaft and the camshaft pulleys as shown before installing the timing belt.
A. Set the crankshaft so that the No. 1 piston is at top dead center. Align the (triangle) mark on the teeth side of the timing belt drive pulley to the
pointer on the oil pump.
B. Align the TDC mark on the left camshaft pulley to the pointer on the left back cover.
C. Align the TDC mark on the right camshaft pulley to the pointer on the right back cover.
4. Install the timing belt tightly in the sequence shown.
(1)
Timing belt drive pulley (crankshaft)
(2)
Adjusting pulley
(3)
Left camshaft pulley
(4)
Water pump pulley
(5)
Right camshaft pulley.
For easy installation, advance the right camshaft pulley by about a half tooth from the TDC position.
5. Loosen the adjust bolt, and retighten it after tensioning the belt.
6. Install the tower cover and crankshaft pulley.
7. Rotate the crankshaft about 5 or 6 turns clockwise so that the belt may fit in position on the pulleys.
8. Carry out timing belt tension adjustment.
