acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Idle Speed|Specifications|Page 2224 > < Idle Speed|Specifications|Page 2222
Page 1
background image

Idle Speed: Adjustments

NOTE:  (Canada) Pull the parking brake lever up. Start the engine, then check that the headlights are off.

1. Connect a tachometer.
2. Start the engine. Hold the engine at 3,000 rpm with no load (A/T in (N) or (P) position, M/T in neutral) until the radiator fan comes on, then let it

idle.

^

Contact type
Remove the rubber cap from the tachometer connector and connect a tachometer.

^

Non-contact type
Connect a tachometer to loop of ICM.

3. Set the steering in the straight ahead position, and check idling in no-load conditions in which the headlights, blower fan, rear defogger, radiator

fan, and air conditioner are not operating. (All accessories turned off.)

Idle speed should be:  

GS Model

680 ± 50 rpm (M/T)
630 ± 50 rpm (A/T in [N] or [P] position)

L, LS Model 

650 ± 50 rpm (M/T)
600 ± 50 rpm (A/T in [N] or [P] position)
 

4. Connect the service check connector terminal with a jumper wire.

Idle Speed|Specifications|Page 2224 > < Idle Speed|Specifications|Page 2222