Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Ignition Control Module: Testing and Inspection
NOTE: See Trouble Code Descriptions if the malfunction indicator lamp (MIL) blinks. See: Computers and Control Systems/Testing and
Inspection
Disconnect the 8-P connector from the ignition control module (ICM). Inspect the connector and socket terminals to be sure they are all making
good contact.
^
If any terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
^
If the terminals look OK, make the following input tests at the connector.
-
If a test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the ICM must be faulty; replace it.