Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
10. Remove the short connectors (RED) from the seat belt pretensioners, then attach them to their holders.
11. Reconnect the left side wire harness 3-P connector to the driver's seat belt pretensioner and the main wire harness 3-P connector to the front
passenger's seat belt pretensioner.
12. Reinstall the "B" pillar lower panel.
13. Reconnect the battery positive cable, then the negative cable.
14. After installing the airbag assembly, confirm proper system operation:
-
Turn the ignition ON (II): The instrument panel SRS indicator light should go on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Take a test drive and make sure the cruise control set/resume switch works.
-
Enter the customer's code number to restore radio operation.