Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
8. Remove the short connectors from the front passenger's airbag connector and from the SRS main harness connector.
9. Reconnect the front passenger's airbag 3-P connector to the SRS main harness connector.
10. Remove the short connectors from the driver's air-bag connector and from the cable reel 3-P connector.
11. Reconnect the driver's airbag 3-P connector to the cable reel 3-P connector. Attach the short connector (RED) to the access panel, then reinstall the
panel on the steering wheel.
12. Remove the short connectors (RED) from the seat belt pretensioners, then attach them to their holders.
13. Reconnect the left side wire harness 3-P connector to the driver's seat belt pretensioner and the main wire harness 3-P connector to the front
passenger's seat belt pretensioner.
14. Reinstall the "B" pillar trim panel.
15. Reconnect the battery positive cable, then the negative cable.
16. After installing the SRS unit, confirm proper system operation; Turn the ignition ON (II); The instrument panel SRS indicator light should go on
for about six seconds and then 90 off.
17. Enter the customer's code number to restore radio operation.