acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

SRS - Cable Reel Holding Fixture|Page 8200 > < SRS - Cable Reel Holding Fixture|Page 8198
Page 6
background image

23. Reinstall the glove box.

24. Remove the short connectors (RED) from the driver's airbag connector and from the cable reel 3-P connector.

25. Reconnect the driver's airbag 3-P connector to the cable reel 3-P connector. Attach the short connector (RED) to the access panel, then reinstall the

panel on the steering wheel.

26. Remove the short connectors (RED) from the seat belt pretensioners, then attach them to their holders.

27. Reconnect the left side wire harness 3-P connector to the driver's seat belt pretensioner and the main wire harness 3-P connector to the front

passenger's seat belt pretensioner.

SRS - Cable Reel Holding Fixture|Page 8200 > < SRS - Cable Reel Holding Fixture|Page 8198