acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Seat Belt Pretensioner Replacement|Page 8344 > < Seat Belt Pretensioner Replacement|Page 8342
Page 3
background image

11. Remove the short connectors from the front passenger's airbag connector and from the SRS main harness connector.

12. Reconnect the front passenger's airbag 3-P connector to the SRS main harness connector.

13. Remove the short connectors from the driver's air- bag connector and from the cable reel 3-P connector.

14. Reconnect the driver's airbag 3-P connector to the cable reel 3-P connector. Attach the short connector (RED) to the access panel, then reinstall the

panel on the steering wheel.

15. Reconnect the battery positive cable, then the negative cable.

16. After installing the SRS unit, confirm proper system operation: Turn the ignition ON (II):

-

The instrument panel SRS indicator light should go on for about six seconds and then go off.

-

Make sure the seat belt retractor and tension reducer work.

17. Enter the customer's code number to restore radio operation.

Seat Belt Pretensioner Replacement|Page 8344 > < Seat Belt Pretensioner Replacement|Page 8342