Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
1. If installed in a car, follow the removal procedure.
2. In all cases, make sure a short connector is properly installed on the airbag or pretensioner connector.
3. Package the airbag or pretensioner in exactly the same packaging that the new replacement part came in.
4. Mark the outside of the box "DAMAGED AIRBAG (or PRETENSIONER) NOT DEPLOYED" so it does not get confused with your parts stock.
If applicable, also note on the box the VIN of the car from which it was removed.
5. Contact your ACURA District Service Manager for how and where to return it for disposal.
Deployment Tool: Check Procedure.
1. Connect the yellow clips to both switch protector handles on the tool; connect the tool to a battery.
2. Push the operation switch: green means the tool is OK; red means the tool is faulty.
3. Disconnect the battery and the yellow clips.
