Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Oxygen Sensor: Description and Operation
Oxygen Sensor Construction and Operation
PURPOSE
The Engine Control Module (ECM) uses the O2 signal to correct fuel mixture by changing injector duration as required.
OPERATION
When heated by the combination of its internal heater and exhaust gases, the sensor supplies a low voltage signal (0 - 1 volt) to the ECM. When
the engine is running rich, the oxygen differential is relatively high so signal voltage increases. When a lean condition occurs the difference in
oxygen content is much lower causing a lower voltage signal to be produced.
CONSTRUCTION
The sensor uses zirconia and platinum to compare exhaust oxygen content with that of the outside air.
