Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Throttle Valve Solenoid: Testing and Inspection
1. Disconnect the transmission sub-harness connector.
2. Measure the resistance between the No.7 and No.8 terminals of the transmission sub-harness.
3. If the resistance is out of specification, disconnect the transmission sub-harness from the shift control solenoid valve/linear solenoid harness
connector.
4. Measure the resistance between the C and D terminals of the shift control solenoid valve/linear solenoid harness connector.
5. Replace the transmission sub-harness if the resistance is within specification.
6. Replace the linear solenoid if the resistance is out of specification.
7. Connect the C terminal of the shift control solenoid valve/linear solenoid harness connector to the battery positive terminal and connect the D
terminal to the battery negative terminal. A clicking sound should be heard.
8. If not, replace the linear solenoid.
NOTE: If linear solenoid replacement is required, see Lower Valve Body Assembly Removal/Installation, Lower Valve Body Assembly
Disassembly/Reassembly and Throttle Valve Body/Linear Solenoid Replacement.
