Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Lock-Up Control Solenoid Valve: Service and Repair
1. Remove the mounting bolts and lock-up control solenoid valve assembly.
NOTE: Be sure to remove or replace the lock-up control solenoid valves A and B as an assembly.
2. Check the lock-up control solenoid valve oil passages for dust or dirt, and replace as an assembly, if necessary.
3. Clean the mounting surface and oil passages of the lock-up control solenoid valve assembly and install a new filter/gasket.
NOTE: Install the filter/gasket in the direction shown.
4. Check connector for rust, dirt or oil and reconnect it securely.