MDX V6-3.7L (2007)
Speaker: Service and Repair
Speaker Test/Replacement
Door Speaker
1. Remove the door panel.
-
Front:
-
Rear:
2. Remove the three mounting screws from the speaker (A).
3. Disconnect the 2P connector (B), and remove the speaker.
4. Measure the resistance between the No. 1 and No. 2 terminals there should be about 2 ohms.
5. If the resistance is not as specified, replace the door speaker.
Center Speaker
NOTE:
-
Put on gloves to protect your hands.
-
Take care not scratch the dashboard.
1. Remove the dashboard upper visor (A).
2. Disconnect the 2P connector (B).