MDX V6-3.7L (2007)
Rear Bumper: Service and Repair
Rear Bumper
Rear Bumper Removal/Installation
NOTE:
-
Put on gloves to protect your hands.
-
Have an assistant help you when removing and installing the rear bumper.
-
Take care not to scratch the rear bumper and body.
1. From the rear wheel arches on both sides, remove the screws (A, B, C) and clips (D) securing the rear bumper (E), and rear fender cover (F).
2. Remove the caps (A). Remove the bolts (B) and clips (C) securing the rear bumper (D).
NOTE: To remove the clips, pry the inner clip up at the edge near the line (E) on its head.
