MDX V6-3.7L (2007)
Front Door Window Regulator: Service and Repair
Front Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel.
2. Disconnect the power door lock actuator connector (A), and remove the plug caps (B).
3. Pass the cables (C) and the harnesses (D) through the slits (E) in the plastic cover (F), then remove the plastic cover.
NOTE: Remove the glue from the door surface. If the plastic cover is damaged or torn, replace it.
4. Carefully raise the glass (A) until you can see the bolts, then remove them. Carefully pull the glass out through the window slot. Take care not to
drop the glass inside the door.
