MDX V6-3.7L (2007)
REPAIR PROCEDURE - FRONT DOOR HANDLE REPLACEMENT
NOTE:
This procedure is in an outline form that you can also use as a checklist for the repair. If you need more details, bookmark the following procedure in
the 07-09 MDX Service Manual, or view them online: Front Door Panel Removal/Installation
1. Raise the glass fully.
2. Remove the door panel.
3. Disconnect the power door lock actuator connector. Remove the cap, then detach enough of the plastic cover to expose the door handle area.
4. Detach the rod fastener from the outer handle.