MDX V6-3.7L (2007)
10. While pulling the outer handle (A), remove the handle from the holes in the door panel. Take care not to scratch the door.
11. Remove the rod fastener (A) from the outer handle (B), then replace it with a new one.
12. Install the handle in the reverse order of removal, and note these items:
-
Make sure the outer handle rod is connected securely.
-
Make sure the door locks operate properly.
-
Make sure the door handle works properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.