MDX V6-3.7L (2007)
4. Pull the tailgate latch (A) out, then remove it
5. Install the latch in the reverse order of removal, and note these items:
-
Make sure the connectors are plugged in properly.
-
Make sure the tailgate opens properly and locks securely.
With Power Tailgate
-
Put on gloves to protect your hands.
-
If the tailgate latch can't be unlocked by using the keyless entry transmitter or the inside/outside tailgate switches, remove the maintenance lid (A)
from the tailgate lower trim panel, then turn the emergency lever (B) clockwise as shown.
1. Make sure you have the anti-theft code for the audio and the navigation system (if equipped), and then disconnect the negative cable from the
battery.
NOTE: If you remove the tailgate latch while the negative battery cable is still connected, the vehicle goes into the fail-safe mode.
2. Remove the tailgate lower trim panel.
3. Disconnect the tailgate latch connector (A) and actuator connector (B).
4. Remove the bolts (C, D).