MDX V6-3.7L (2007)
Carpet: Service and Repair
Carpet Replacement
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to damage, wrinkle or twist the carpet.
-
Be careful not to damage the dashboard and other interior trim pieces.
1. Remove these items:
-
Front seats, both sides
-
Second row seats, both sides
-
Third row seats, both sides
-
Front door sill trim, both sides
-
Rear door sill trim, both sides
-
Kick panels, both sides
-
Driver's dashboard undercover
-
Passenger's dashboard undercover
-
Steering joint cover
2. Detach the hooks (A), then remove the footrest plate (B).
3. Remove the nut (A). Using a 6 mm socket wrench, release the clip (B), then remove the footrest (C).