MDX V6-3.7L (2007)
2. Remove the screws, then pull out the beverage holder to release the hooks.
3. Install a new beverage holder using the existing screws and cover.
REPAIR PROCEDURE B
NOTE:
This repair is not covered under warranty because the cause is not a manufacturing defect.
1. Remove the beverage holder:
^
Detach the hooks, then remove the beverage holder cover.
^
Remove the screws, then pull out the beverage holder to release the hooks.
2. Inspect the beverage holder for small toys or similar objects that may be jammed in it.
3. Wash the beverage holder with soap and water, then dry it with compressed air. Check that the holder slides smoothly.
4. Reinstall the beverage holder, the screws, and the cover.
