MDX V6-3.7L (2007)
Sun Visor: Service and Repair
Sunvisor Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Take care not to scratch the headliner.
-
Be careful not to damage the dashboard and other interior trim.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
When using a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Using a trim tool, release the tabs (A) of the sunvisor cap (B) from the bracket (C).
2. Remove the sunvisor (A).
1. Remove the screws.
2. Remove the sunvisor from the body and holder (B).
3. Disconnect the vanity mirror light connector (C).