MDX V6-3.7L (2007)
Trim Panel: Service and Repair
Trim Removal/Installation - Cargo Area
Trim Removal/Installation - Cargo Area
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the cargo floor lid (A).
2. Detach the hooks (A) from the rear side trim panel (B), and pull the rear trim panel (C) up by hand to detach the clips (D, E), then remove it.
