MDX V6-3.7L (2007)
-
Front door sill trim
-
Kick panel
-
Driver's dashboard undercover
-
Passenger's dashboard undercover
6. Passenger's side: Remove the glove box damper from the pivot on the glove box. While holding the glove box, release the glove box stop on each
side from the dashboard by pushing them in, then lower the glove box.
7. Driver's side: Remove the bolts, then move the under-dash fuse/relay box (A) as needed.
8. To remove a front drain valve (A) from the body, tie a string to the top end of the drain tube, then pull the front drain tube (B) down out of the
A-pillar. Leave the string in the pillar to use when reinstalling the drain tube.
Rear Drain Tube
9. Remove these items:
-
Rear side trim panel
-
Left side: Subwoofer box