MDX V6-3.7L (2007)
Head Rest: Testing and Inspection
Front Seat Active Head Restraint Inspection
NOTE: If the vehicle has been in a collision, always inspect the active head restraint, even if they appear reusable, by doing the following procedure.
Resetting Head Restraint Position
1. Push the head restraint (A) forward fully from the locked position to return the inside inertia lock (B).
2. Slowly raise the head restraint into the normal position.
Inspection
3. Fold the seat-back forward, then recline the seat-back to the first lock position, and adjust the head restraint to the highest position.
4. Apply masking tape on the top of the head restraint.
5. Make marks (A) on both sides at 285 mm (11.2 in.) upward from the roots of the head restraint frame (B) along the back of the head restraint (C)
surface. Make a center of these points as a datum point (D).