MDX V6-3.7L (2007)
13. Remove the bulkhead bracket (D), and radiator and A/C condenser mount upper bracket/cushion (E), then remove the fan shroud mount bolts (F).
14. Displace the fan shrouds to the engine side, then pull up the radiator assembly (A).
15. Remove the fan shroud assembly.
16. Install the radiator and fans in the reverse order of removal.
17. Install the bulkhead bracket in the reverse order of removal. Apply body paint to the bulkhead bracket mounting bolts.
18. Set the upper and lower cushions securely.
19. Fill the radiator with engine coolant and bleed the air from the system.
20. Fill the transmission with ATF.
21. Adjust the engine hood latch.
22. Install the battery. Clean the battery posts and cable terminals with sandpaper, then assemble them and apply grease to prevent corrosion.
23. Do the steering column position memorization.
24. Enter the anti-theft codes for the audio system and navigation system (if equipped).
25. Set the clock.
