MDX V6-3.7L (2007)
Rocker Arm Assembly: Overhaul
Rocker Arm and Shaft Disassembly/Reassembly
NOTE:
^
Identify parts as they are removed so they can be reinstalled in their original locations.
^
Inspect the rocker shafts and rocker arms.
^
If reused, the rocker arms must be installed in their original locations.
^
When removing or installing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and rocker
arms on the shaft.
^
Bundle the intake rocker arms with rubber bands to keep them together as a set.
^
Prior to reassembling, clean all the parts in solvent, dry them and apply new engine oil to any contact points.
^
When replacing the intake rocker arm assembly, remove the fastening hardware from the new intake rocker arm assembly.