MDX V6-3.7L (2007)
Piston: Service and Repair
Crankshaft and Piston Installation
Crankshaft and Piston Installation
Special Tools Required
^
Driver 07749-0010000
^
Driver attachment, 106 mm 070AD-RCAA200
1. Check the connecting rod bearing clearance with plastigage.
2. Check the main bearing clearance with plastigage.
3. Install the bearing halves in the engine block and connecting rods.
4. Apply new engine oil to the inside of the main bearings and rod bearings.
5. Lower the crankshaft (A) into the engine block.
6. Apply new engine oil to the side with the thrust washer groove. Install the thrust washers (A) in the No. 3 journal.
7. Install the bearings (A) and bearing caps (B) with the arrow (C) facing the timing belt end of the engine.
