MDX V6-3.7L (2007)
Click on the image below to hear an example of the noise.
REPAIR PROCEDURE
NOTE:
The TL is shown; the MDX is similar.
1. Raise the vehicle on the lift.
2. Remove the front splash shield.
^
Detach the clips.
^
Remove the bolts from under the front bumper.
3. TL only Remove the A/C condenser fan shroud assembly.
^
Disconnect the A/C condenser fan motor connector, and remove the harness clamp.
^
Loosen the A/C condenser fan shroud assembly mounting bolts.
^
Lower the vehicle.
