MDX V6-3.7L (2007)
3. Install the upper cover. Tighten the bolts and nuts sequentially in two or three steps. Always use a new gasket.
4. Install the evaporative emission (EVAP) canister hose (A) and water bypass hoses (B).
5. Connect the manifold absolute pressure (MAP) sensor connector (C), throttle actuator connector (D) and EVAP canister purge valve connector
(E).
6. Install the positive crankcase ventilation (PCV) hose (A), brake booster vacuum hose (B), vacuum hose (C) and connect the intake manifold tuning
(IMT) actuator connector (D).
