MDX V6-3.7L (2007)
Air Register: Service and Repair
Side Defogger Vent Trim
Side Defogger Vent Trim Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Take care not to scratch the dashboard and its related parts.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
The driver's side defogger vent trim is shown; the passenger's side defogger vent trim is similar.
1. Insert the trim tool into a gap between the side defogger vent trim (A) and the dashboard (B), and release the hooks (C).
2. Install the side defogger vent trim in the reverse order of removal, and push the hooks into place securely.
