MDX V6-3.7L (2007)
Evaporator Core: Service and Repair
Front Evaporator Core Replacement
1. Recover the refrigerant with a recovery/recycling/charging station.
2. Remove the bolts.
3. Remove the bolts, then disconnect the front receiver line (A) and the front suction line (B) from the front evaporator core.
4. Remove the blower unit.
5. Disconnect the connector (A) from the front power transistor, then remove the harness clip (B). Remove the self-tapping screws, the expansion
valve cover (C), and the seal (D).
