MDX V6-3.7L (2007)
15. Remove the self-tapping screws and the passenger's heater duct (A). Remove the self-tapping screws and the expansion valve cover (B). Remove
the self-tapping screw and the front heater core cover (C). Remove the self-tapping screws, the heater pipe brackets (D), the grommets (E), and
carefully pull out the front heater core (F).
16. Install the front heater core, and the front evaporator core in the reverse order of removal.
17. Install the heater unit in the reverse order of removal, and note these items:
-
Do not interchange the inlet and outlet heater hoses, and install the hose clamps securely.
-
Refill the cooling system with engine coolant.
-
Adjust the heater valve cable.
-
Make sure that there is no coolant leakage.
-
Make sure that there is no air leakage.
-
Refer to the front evaporator core replacement.
-
Reset the power window control unit.
-
Do the steering column position memorization.
-
Enter the anti-theft codes for the audio system and the navigation system (if equipped).
-
Set the clock.
