acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Oil Level Warning Indicator:|09-012|Page 11382 > < All Technical Service Bulletins for Oil Level Warning Indicator:|09-012
Page 2
background image

The updated PGM-FI software program IDs and P/Ns are shown. If the HDS is loaded with the latest software, and it displays No Update Needed during
the update, the software for this service bulletin is already installed.*

WARRANTY CLAIM INFORMATION

The normal warranty applies.

Failed Part:

P/N 37240-RDM-A01

Defect Code:

03214

Symptom Code:

03205

Skill Level:

Repair Technician

REPAIR PROCEDURE

1. Start the engine, turn the steering wheel fully to the right, then shut off the engine.

2. Raise the vehicle on a lift, and make sure it's securely supported.

3. Detach the front clip from the right front inner fender. Pull back the edge of the inner fender, and look for an "R72" mark on the right side of the oil

pump:

^

If the oil pump has the "R72" mark, use P/N 37240-R72-A01 for the new engine oil pressure switch.

All Technical Service Bulletins for Oil Level Warning Indicator:|09-012|Page 11382 > < All Technical Service Bulletins for Oil Level Warning Indicator:|09-012