MDX V6-3.7L (2007)
Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life. The message "SERVICE", along with "0 %", and the
maintenance item code are displayed on the lower part of the multi-information display when the calculated engine oil life is 0-1 %.
If the indicated required service is not done and the remaining engine oil life becomes 0%, the multi-information display will show a "SERVICE PAST
DUE" message, the total mileage after the remaining oil life became 0 %. and the maintenance item code(s).
This message is displayed when the vehicle is driven over 10 miles (for U.S. models) or 1 km (for Canadian models) after the 0% message is displayed.
The service should be immediately performed and the display reset. Refer to the article under "Resetting the Maintenance Minder".
The message will be canceled if the Arrow Down or Arrow Up button on the steering wheel is pressed. Press the Arrow Down or Arrow Up button to see
the message again.
When you press the SEL/RESET button to select the engine oil life the message "SERVICE" along with the maintenance item code and the total
negative mileage after the oil life became 0 % will be displayed on the lower part of the multi-information display.
Maintenance Main Items and Sub Items
