MDX V6-3.7L (2007)
-
5 Rear camshaft pulley (E)
-
6 Adjusting pulley (F)
7. Tighten the idler pulley bolt.
8. Remove the battery clamp bolt from the back cover.
9. Install the lower half of the side engine mount bracket.
-
5 Rear camshaft pulley (E)
-
6 Adjusting pulley (F)
7. Tighten the idler pulley bolt.
8. Remove the battery clamp bolt from the back cover.
9. Install the lower half of the side engine mount bracket.