MDX V6-3.7L (2007)
then insert the control pin into the control lever hole through the shift cable end, and secure the control pin with the spring clip/washer.
30. Secure the shift cable bracket with the nuts.
31. Install the battery base bracket and battery base.
32. Install the air cleaner housing and intake air duct.
33. Install the under-hood subfuse box on the battery base, and install the subfuse box on its bracket.
34. Install the battery tray, battery, battery cover, and battery hold-down bracket, then connect battery terminals.
35. Enter the anti-theft codes for the audio system and the navigation system (if equipped). Set the clock.
36. Do the steering column position memorization.
37. Do the power window control unit reset procedure.
