MDX V6-3.7L (2007)
height is about 7 mm (0.3 in.) If the height is over 7 mm (0.3 in.) push the pipe until it bottoms in the accumulator body.
21. Install the new gasket (A) on the transmission housing, and install the 8 x 34.5 mm ATF joint pipe (B) with the filter end into the transmission
housing and 8 x 25.2 mm ATF pipe (D).
22. Install the new O-rings (E) over the ATF joint pipes.
23. Install A/T clutch pressure control solenoid valve C.
24. Check the connector for rust, dirt, or oil, then connect the connector securely.
25. Install the battery base bracket and battery base.
26. Install the air cleaner housing and intake air duct.
27. Install the under-hood subfuse box on the battery base, and install the subfuse box on its bracket.
28. Install the battery tray, battery, battery cover, and battery hold-down bracket, then connect battery terminals.
29. Enter the anti-theft codes for the audio system and the navigation system (if equipped). Set the clock.
30. Do the steering column position memorization.
31. Do the power window control unit reset procedure.
