MDX V6-3.7L (2007)
22. Apply molybdenum grease to the bore hole of the synthetic resin bushing in the shift cable end, and attach the shift cable end to the control lever,
then insert the control pin into the control lever hole through the shift cable end, and secure the control pin with the spring clip/washer.
23. Secure the shift cable bracket with the nuts.
24. Install the battery base bracket and battery base.
25. Install the air cleaner housing and intake air duct.
26. Install the under-hood subfuse box on the battery base, and install the subfuse box on its bracket.
27. Install the battery tray, battery, battery cover, and battery hold-down bracket, then connect battery terminals.
28. Turn the ignition switch ON (II). Move the shift lever through all positions, and check the transmission range switch synchronization with the A/T
gear position indicator.
29. Check that the engine will start in the P and N positions, and will not start in any other shift lever position.
30. Check that the back-up lights come on when the shift lever is in the R position.
31. Allow the all four wheels to rotate freely, then start the engine, and check the shift lever operation.
32. Enter the anti-theft codes for the audio system and the navigation system (if equipped). Set the clock.
33. Do the steering column position memorization.
34. Do the power window control unit reset procedure.
