acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Tire Pressure Monitor Receiver / Transponder:|07-057|Page 613 > < All Technical Service Bulletins for Tire Pressure Monitor Receiver / Transponder:|07-057
Page 2
background image

Symptom Code:

03220

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

1.

Inflate all of the tires to the recommended pressure shown in the doorjamb. Use the recommended tire pressure gauge to make sure the pressures
are accurate.

2.

Drive the vehicle until you see the pressure change in the multi-information display (MID).

3.

Check the pressures of all of the tires in the MID. Are all of the tire pressures shown in the MID within 3 psi of what you set them at?

Yes - You are finished.

NOTE

This is not a warrantable repair if the low tire pressure indicator goes off with proper air pressure.

No - Go to REPAIR PROCEDURE to replace any sensor that is not within this specification.

REPAIR PROCEDURE

Replace the faulty sensor(s):

^

Refer to the appropriate service manual, or

^

Online, enter keywords TIRE SENSOR, and select Tire Pressure Sensor Replacement from the list.

Disclaimer

All Technical Service Bulletins for Tire Pressure Monitor Receiver / Transponder:|07-057|Page 613 > < All Technical Service Bulletins for Tire Pressure Monitor Receiver / Transponder:|07-057