MDX V6-3.7L (2007)
Alternator: Removal and Replacement
Alternator Removal and Installation
Removal
1. Make sure you have the anti-theft codes for the audio system and navigation system (if equipped). Make sure the ignition switch is OFF.
2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
3. Remove the engine cover
4. Remove the drive belt
5. Remove the A/C suction line from brackets (A).
6. Remove the coolant reservoir (A), then remove power steering fluid reservoir (B) from the bracket.
7. Remove the harness bracket (A), then disconnect the A/C compressor clutch connector (B).
8. Disconnect the alternator connector (C) and the BLK wire (D) from the alternator.
