MDX V6-3.7L (2007)
Ignition Switch: Service and Repair
Ignition Switch
Replacement
SRS components are located in the area. Review the SRS component locations and precautions and procedures before performing repairs or servicing.
1. Make sure you have the anti-theft code for the audio and navigation system (if equipped).
2. Disconnect the negative battery cable.
3. Remove the steering column covers.
4. Disconnect the 7P connector (A) from the ignition switch (B).
5. Remove the two screws and the ignition switch.
6. Install in the reverse order of removal.
7. After reconnecting the battery, enter the audio and navigation system anti-theft codes, and set the clock.