MDX V6-3.7L (2007)
14. Measure the brush length. If it is shorter than the service limit, replace the brush holder assembly.
Starter Brush Holder Test
15. Check for continuity between the (+) brush (A) and (-) brush (B). If there is continuity, replace the brush holder assembly.
Brush Spring Inspection
16. Insert the brush (A) into the brush holder, and bring the brush into contact with the commutator, then attach a spring scale (B) to the spring (C).
Measure the spring tension at the moment the spring lifts off the brush. If it is not within the standard, replace the brush holder assembly.
Planetary Gear Inspection
