MDX V6-3.7L (2007)
7. Remove and discard the valve stem grommet (A) from the tire pressure sensor (B).
NOTE:
-
The valve stem grommet might stay in the wheel; make sure you remove it.
-
Always use a new valve stem grommet whenever the tire pressure sensor has been removed from the wheel. When only removing a tire from
the wheel, replace the valve stem grommet if it is possible.
Installation
NOTE:
-
Use only wheels that have a "TPMS" stamp (A) on them.
-
This vehicle may be equipped with either type 1 or type 2 wheels.