acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Arm Bushing:|08-005|Page 8250 > < Customer Interest for Control Arm Bushing:|08-005|Page 8247
Page 1
background image

Control Arm Bushing: All Technical Service Bulletins
Suspension - Front End Click On Braking/Acceleration

08-005

August 28, 2009

Applies To: 
2007-08 MDX - ALL

2009 MDX - From 2HNYD2...9H500001 thru 2HNYD2...9H517153

Click From the Front Suspension Area While Accelerating or Braking (Supersedes 08-005, dated July 7, 2009, to revise the information marked by the
black bars and asterisks)

REVISION SUMMARY
*Under WARRANTY INFORMATION, the flat rate time for a two-wheel alignment was updated after the operation was reviewed and validated.*

SYMPTOM

There are one or more clicking noises in the front suspension area while accelerating or braking.

PROBABLE CAUSE

The compliance bushings in the front lower arms are faulty.

CORRECTIVE ACTION

Replace both front compliance bushings, and check the wheel alignment.

PARTS INFORMATION

TOOL INFORMATION

Ball Joint Remover, 32 mm:

T/N 07MAC-SLOA102

Ball Joint Thread Protector, 14 mm:

T/N 071AF-53VA000

WARRANTY CLAIM INFORMATION

In warranty: 

All Technical Service Bulletins for Control Arm Bushing:|08-005|Page 8250 > < Customer Interest for Control Arm Bushing:|08-005|Page 8247