MDX V6-3.7L (2007)
6. Remove the damper pinch bolts (A) and flange nuts (B) from the damper..
7. Remove the cover (A) and the service caps (B).
8. Remove the flange nuts (C) from the top of the damper.
9. Remove the damper assembly (D).
NOTE:
^
The damper springs are different, left and right. Mark the springs L and R before you continue.
^
Be careful not to damage the body.
Installation
1. Install the damper assembly (A) on to the frame. Note the direction of the damper mounting base as shown.
NOTE: Be careful not to damage the body.
