MDX V6-3.7L (2007)
4. Remove the flange nut (A) while holding the respective joint pin (C) with a hex wrench, then remove the stabilizer link from the lower arm B.
5. Position the floor jack under the lower arm B. Raise the floor jack until the suspension begins to compress.
6. Remove the flange bolt (A) from the bottom of the damper.
7. Remove the flange bolt (C) from the knuckle.
8. Lower the floor jack gradually.
9. Remove the spring (A) and the lower spring seat (B).
10. Remove the flange bolt (A) that connects the body, and remove the bump stop (B) the spring guide (C) and the spring mounting cushion (D) if
necessary.
