MDX V6-3.7L (2007)
14. Remove the harness clamp (F) from the clamp bracket (G).
15. Disconnect the A/T clutch pressure control solenoid valve A connector (A) A/T clutch pressure control solenoid valve B connector (B) and shift
solenoid harness connector (C).
16. Remove the bolt securing the harness cover (D) and disconnect the 4th clutch transmission fluid pressure switch connector (E).
17. Remove the A/T clutch pressure control solenoid valve A and B, ATF pipes (C), and gasket (D).
18. Replace the gasket and O-rings (E) with new ones when installing the A/T clutch pressure control solenoid valve A and B.
19. Remove the solenoid valve cover (A) dowel pins (B), and gasket (C).